Glamour Greeks Wedding Bands Wedding and Anniversary Bands

Steel Cable

Thanks for Visiting. We Have Some Amazing Steel Cable Product Information For You, So Please Have a Look Around!

More Great Information on Steel Cable:

Advantages of cable trays for engineering industries by jenny Dsouza

Ladder Type Cable Trays:

Ladder type cable trays that are available in wide specifications. These ladder type cable trays are made of mild steel that is pre galvanized. They have two longitudinal side rails connected by rungs. Some of the specifications of ladder type cable trays are as follows:

Available in width ranging from 150mm to 1200 mm
Height ranges from 50 mm to 150 mm
Thickness varies from 16 SWG to 10 SWG
It comes in hot dip galvanized, red oxide, enamel painted and power coated Finish

The standard length of this tray is 2500mm and the steel used is as per IS: 2062/1079 and the galvanizing is done as per IS: 2629/4759. There is a wide array of accessories that come along with the ladder. They are as follows:

Straight ladder
Horizontal elbow
Horizontal tee
Horizontal cross
Horizontal reducer
Vertical elbow up
Insider
Vertical elbow down
Outside
Coupler plate
Fasteners

Perforated Cable Trays:

The perforated cable trays come in two categories namely drilled and perforated. These perforated cable trays come in 50 mm length with a minimum of 25 mm cross section. The perforated category comes in widths ranging from 50 mm to 900 mm. They have the capacity for standard support span of 2,500 mm. These perforated cable trays are specially engineered making use of quality HR sheets and pre galvanized sheets with specific thickness and flange heights. Some of its important specifications are given below:

It comes in varied finish such as hot dip galvanized, Red oxide, Enamel painted &
ower coated.
Standard length of the tray is 2500 mm
The Steel used is as per IS: 2062/1079 and the galvanization is as per IS: 2629/4759

The lists of accessories that are provided with it are:

Straight leader
Horizontal elbow
Horizontal tee
Horizontal cross
Horizontal reducer
Vertical elbow up
Inside
Vertical elbow down
Outside
Coupler plate
Fasteners

Drilled and perforated. These perforated cable trays come in 50 mm length with a minimum of 25 mm cross section. The perforated category comes in widths ranging from 50 mm to 900 mm. They have the capacity for standard support span of 2,500 mm. These perforated cable trays are specially engineered making use of quality HR sheets and pre galvanized sheets with specific thickness and flange heights.

Cable Tray | Cable Trays | Ladder Cable Tray | Ladder Cable Trays | Ladder Type Cable Trays

Article Source: http://www.earticlesonline.com/Article/Advantages-of-cable-trays-for-engineering-industries/862414